Sullivan Steel Matched Left and Right Control Horn 1-1/8 inch

Product Information

Sullivan Steel Matched Left and Right Control Horn 1-1/8 inch

Manufacturer Stock# S557

This is a pair of heat treated steel control horns for heavy-duty
applications, like split elevators or pull-pull systems.

This Package Includes:
   (2) 1-1/8" control horns - These have a  "L" shaped cross-section and have
        4 holes for mounting the clevis at the top of the horn.
   (4) control horn mounting screws - These are 2-56 x 3/4" screws. They use
        a flat head screwdriver to tighten/loosen.
   (4) Plastic washers
   (2) Control horn mounting plates - These are made of nylon.
   (2) Nylon Clevis points - This piece mounts to the control horn. They have
        a hole in the top where the clevis pin goes through. They secure to
        the control horn by using a small piece of 1/32" music wire (or a paper
        clip, neither are included)
   (2) Nylon washers - These secure the clevis point to the control horn
Requires:
  A small piece of 1/32" music wire or a paper clip - used to secure the clevis
   points to the control horn. 

Product Code: S557

In Stock